Doc. SIE10166 Rev. 10 Page 12 of 28
item moving the knob. Once the item has been found and programmed, pressing the arrow the menu
moves back, so that other programming can be performed.
After test start, measurements are displayed in the corresponding window. Pressing the knob it is
possible to return to menu selections and modify them, and then it is possible to return to the
measurements window.
Any setting can be saved to and recalled from the memory, with a line of text description. At
power-on, the default one is displayed: it can also be recalled as necessary. Settings are permanently
stored in the memory; new settings can be written to the same address after confirmation. For
normal mode operation it is possible to recall the standard setting, that cannot be modified.
During the test, test results can be stored in the memory, according to selections.
2.13 OTHER CHARACTERISTICS
. Mains supply:
.. From 85 to 265 V AC; 50-60 Hz,
.. From 100 to 350 V DC.
. Maximum supply current: 1 A @ 85 V AC; power consumption 85 VA.
. Test set operation: from the mains, or from an internal battery. Battery characteristics:
.. Type: Ni-Mh, rechargeable.
.. Battery operating time: 4 hours (CB tests); 1 hour (microhmmeter).
.. Battery charging time: 8 hours.
. Housing: aluminium case, with hinged removable cover and handles.
. The instrument comes complete with the following items:
.. Mains cable;
.. User’s manual;
.. Serial cable;
.. USB cable;
.. One cable, yellow/green, for the connection to ground. Cable length: 4 m; cross section 1
sq. mm, terminated with a crocodile;
.. Spare fuses;
.. Software TDMS.
. Dimensions: 400 (W) * 300 (D) * 240 (H) mm.
. Weight: 10 kg.
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.ca
To Next Page
Loading...
