Before installing the handlebars, use these 4 M5 screws to tighten the handle
bar part. Make sure the 4 screws are securely tightened.
3.1 Assembling the Handlebars
Make sure the iscooter i8 is turned off before working with any of its parts.
The scooter comes mostly assembled within the package.
Some parts are required to assembly by yourself before riding. All parts and
tools are included.
1.Locate the kickstand on the side of the scooter’s deck.
2.Push the kickstand down and away from the scooter then carefully lean the
weight of the scooter onto the kickstand.
3.2 Standing the Scooter
4 M5 screws
FOLDING & ASSEMBLY
To Next Page
Loading...
