ISEG:5230003:0:0:0:VoltageMeasure
ISEG:5230003:0:0:0:VoltageNominal
...
For more detailed information on EPICS, please visit: http://www.aps.anl.gov/epics/, for sample libraries and test scripts, please
contact support @iseg-hv.de.
isegHALService
The isegHALservice provides a secure sockets encrypted end-to-endpoint access to iseg Hardware layer running on crate
Controller / iCSmini hardware. The isegHALservice API is similar to isegHALapi with some specific extension. Please refer
Appendix “isegHAL” for details. For an easy start a simple example program isegHalRemoteExample demonstrates the remote
access. There are virtual instruments (VIs) which are based on the library “isegHAL-remote” in order to control iseg hardware via
LabVIEW
4
.
SNMPservice
For backward compatbility of the iCS2 to SNMP controlled systems like WIENER mPOD iCS2 is able to communicate using the
SNMP service.
The service can be enabled or disabled using the switch „enable SNMP interface“.
Using the current iCS2 hardware configuration a SNMP configuration can be automatically generated. To create a new SNMP
configuration, which is compatible to WIENER Configuration file (.mib) please use button “generate configuration” under the
SNMP tab in iCSconfig.
For user specific changes of configuration, the .mib (vendor specific definition of datapoints) and .sub (substition information with
list of hardware channels) files can be downloaded, locally modified and reuploaded.
Please note: local modifications will overwritten every time the “generate configuration” function will be used.
Software architecture of the iCS2 system
4 Copyright National Instruments
To Next Page
Loading...
Need help?
General
