To Next PageTo Next PageWhat to do if the ISHIDA INS-100 Scales reading weight is unstable?
If the ISHIDA Scales reading weight is unstable, ensure that nothing is touching the weigh platter from above, the side, or below. Also, verify that the scale is level and check for any air currents, vibration, or an unstable mounting surface.
What to do if “OL” appears on the display of my ISHIDA INS-100?
If “OL” appears on the display, it means the item you are weighing exceeds the scale's capacity. Remove the item that exceeds the weighing capacity.
What to do if my ISHIDA Scales do not start and the display is blinking?
If your ISHIDA Scales do not start and the display is blinking, it could be due to something being on the weigh platter or the weigh platter not being placed correctly. Remove any items from the weigh platter and ensure the weigh platter is correctly placed.
Why do “LLLL...” appear on the display of my ISHIDA INS-100 Scales?
If you see “LLLL...” on the display, it indicates that the charge is insufficient or the battery is deteriorated. Charge the battery, or, if the battery cannot be charged, replace it.
Why does the display disappear quickly after turning on my ISHIDA INS-100?
The display disappearing quickly after turning on the ISHIDA Scales suggests that the charge is insufficient or the battery is deteriorated. Try charging the battery. If that doesn't work, replace the battery.
What to do if an error buzzer sounds when entering the tare weight on my ISHIDA INS-100 Scales?
If an error buzzer sounds when you enter the tare weight, and the operation is not accepted, it means that the data entered is outside the tare setting range or the last digit number does not match the minimum weight. Enter a tare weight within the allowable range and ensure it matches the minimum weight requirement.
Why does “- - - - - -” appear on the price display of my ISHIDA Scales?
If you see “- - - - - -” on the price display, it indicates that the price is exceeding “999999”. Set the price within the allowed range.
What to do if after turning on the ISHIDA INS-100 there are no displays but buzzer sounds continuously?
If, after turning on the ISHIDA Scales, there are no displays but the buzzer sounds continuously, check the following: * Ensure the weigh platter is correctly mounted on the scale. * Confirm that no objects are touching the weigh platter from above, side, or below. * If the scale is out of calibration due to overload or shock load, contact a service representative.
What to do if after turning on the ISHIDA INS-100 there are no displays and no beeps?
If after turning on the ISHIDA Scales there are no displays and no beeps, check that the scale is plugged into a live outlet. If it is, unplug the scale from the outlet and check the main fuse.
Why am I unable to add numeric values on my ISHIDA INS-100 Scales?
If you cannot add numeric values, it means that the total price will exceed “999999” if the next addition is performed. Keep the total price within the allowed range.
General
