15
2. The dispensing piston seal has been damaged.
——— The dispensing piston needs to be
replaced and is available as an original
iSi spare part.
During operation, gas is leaking between the
bottle and the head.
1. The head gasket is missing.
——— “Release the pressure” and insert the
head gasket into the head.
2. The head gasket has been damaged.
——— “Release the pressure.” The head gasket
needs to be replaced and is available as
an original iSi spare part.
3. The head was not tightened securely.
——— Tighten the head on to the bottle by
hand as per the instructions.
4. The bottle has been damaged on the upper
edge.
——— “Release the pressure” and send the
whipper to iSi or a service center.
Service.
Replacement parts are available individually
and at an affordable price.
See your specialist dealer for the availability of
replacement parts. In Austria, you can also get
in contact via info@isi.com. In the US contact
isinorthamerica@isi.com
Only send in the complete whipper for repairs.
Replacement parts can be seen in greater detail
on the expanded drawing.
EN
To Next Page
Loading...
