EasyManua.ls Logo

iSinwheel U2 - Battery Maintenance

iSinwheel U2
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Be aware of your surroundings and avoid obstacles and unsafe surfaces.
Ride in the open and flat. Try to avoid slopes or places with many pedestrians.
Do not ride at high speeds, on uneven terrains, in bad weather or in other unsafe
conditions.
Never use the electric bike for anything that could cause personal injury or property
damage.
Do not attempt to carry passengers or heavy objects. This bike can only hold the
weight of one person at a time. Do not exceed the weight limit.
Ride e-bikes only where permitted. You must obey local laws and be courteous to
pedestrians.
● For your own safety and the safety of others, obey the speed limit, ride at a speed
you are comfortable with, and be prepared to stop at any time.
● Keep a safe distance from other riders to avoid collisions.
8. Battery Maintenance
A well-maintained battery performs well even after high mileage. Charge the
battery after each ride to prevent the battery from draining from a full charge.
Batteries perform best when used at room temperature (70°F [22°C]). However,
using it at temperatures below 32°F (0°C) will degrade performance. In general, at
-4°F (-20°C), battery performance drops to half of that at 70°F (22°C). When the
temperature rises, battery life will resume.
Under normal circumstances, a fully charged battery can hold power for 90 days in
standby mode. Remember to charge the battery after each use. Draining the
battery may cause permanent damage to the battery. Electronics inside the battery
record the charge and discharge of the battery. Damages due to over-discharge or
over-discharge are not covered by the warranty.
Refer to local laws and regulations regarding battery recycling and/or disposal.

Related product manuals