User’s Manual WM3M4 &WM3M4C
4.1 Introduction
Parameterization can be modified by serial communication (RS485) or by a special WM-USB adapter
(size 1 DIN module) and MiQen software version.
4.2 MiQen software
MiQen software is a tool for complete programming and monitoring of ISKRA measuring instruments,
connected to a PC via serial communication or by a special WM-USB adapter. A user-friendly interface
consists of six segments: devices management (Connection), instrument settings (Settings), real-time
measurements (Measurements), data analysis (Analysis), saved preffered devices (My Devices – this
action is not supported by this meter) and software upgrading (Upgrades – this action is not supported
by this meter). These segments are easily accessed utilizing icons on the left side (see Figure 6).
Figure 9: MiQen programming and monitoring software
For further managing those segments, icons on the top bar can be utilised.:
- READ SETTINGS : displays all device’s settings
- READ MEMORY : data is read directly from a device’s internal memory
- OPEN : data is read from a local database
- DOWNLOAD SETTINGS : changes should be confirmed by pressing this button when
finished programming
- SAVE : the file settings will be saved
- EXPORT : data can be exported to an Access data base, Excel worksheets or as a text file
- PRINT : data listing can be exported into PDF file or printed on a paper
To Next Page
Loading...
