11
ILCM 06 English
1. To avoid electric shock, remove the instrument from
any circuit under test before replacing the batteries.
2. Do not mix batteries of different types or old and
new batteries.
3. Check the battery polarity carefully when inserting
the batteries.
4. Do not short-circuit used batteries, disassemble
them, or throw them in a re. Doing so may
cause the batteries to explode.
5. Dispose of the used batteries in accordance
with local regulations.
Do not attempt to repair this instrument
It contains no user-serviceable parts.
Repair or serving should only be
performed by qualied personnel.
Periodically wipe the case with a dry
cloth and detergent, do not use abrasives or solvents.
6000 digit large scale
LCD readout.
5 times / sec.
Shows the real value for “100A”
and shows “OL” for other ranges.
Approximately 20 minutes
after power on without operations.
Replace the battery when the
indicator
appears in the display.
1.5V x 2 batteries.
Alkaline AAA, R03 or UM4.
60 hours typical.
To Next Page
Loading...