12
ILCM 06 English
One year
calibration cycle
0°C ~ 30°C (≤80% RH)
30°C ~ 40°C (≤75% RH)
40°C ~ 50°C (≤45%RH)
-20 to +60°C, 0 to 80% RH
(batteries not tted).
2000m (6562 ft)
40mm diameter.
No shock, no vibration to the jaw tips.
0.2 x (Specied accuracy) /
°C, < 18°C, > 28°C .
EN 61326-1
IEC 61010-1 300V CAT III.
Pollution degree 2
I
is for
measurements performed on circuits
not directly connected to the mains.
Examples include: Measurements on
battery powered equipment and specially
protected (internal) mains-derived circuits.
II
is for
measurements on circuits directly
connected to the low voltage installation.
Examples include: Household appliances,
portable tools and similar equipment.
III
is for
measurements performed in the
building installation. Examples include:
measurements on distribution boards,
junction boxes, socket-outlets and wiring
and cables in the xed installation.
IV
for
measurements performed at the source
of the low-voltage installation Examples
include: Measurements on primary
overcurrent protection devices and
electricity meters.
To Next Page
Loading...
