Iso-Tech IPS 2303S - Remote Control; Remote Control Setup and Connection

IPS X303 Series Instruction Manual
38
REMOTE CONTROL
Remote Control Setup
Background
The IPS 3303D and IPS X303S are capable of being remotely controlled
via the USB connection.
Interface
USB slave port, rear panel
COM setting
Set up the COM port inside the PC according to the following list.
 Baud rate: 57600 or 115200
 Parity bit: None
 Data bit: 8
 Stop bit: 1
 Data flow control: None
Functionality
check
Run this query command via the terminal application such as MTTTY
(Multi-threaded TTY).
*IDN?
This should return the identification information: Manufacturer, model
name, serial number, firmware version.
Iso-tech, IPS X303x, SN: xxxxxxxx, Vx.xx