Iso-Tech IPS 2303S User Manual

REMOTE CONTROL
41
Error Messages
The following error messages might appear when the IPS 3303D or X303S cannot accept
the command.
Message contents
Descriptions
Program mnemonic too
long
The command length must be 15 characters or less.
Invalid character
Invalid characters, such as symbols, are entered. Example: VOUT#
Missing parameter
The parameter is missing from the command. Example: VSET:
(should have a number)
Data out of range
The entered value exceeds the specification. Example: VSET:33
(should be ≤ 32V)
Command not allowed
The entered command is not allowed in the circumstance.
Example: trying to set CH2 output while in the tracking mode.
Undefined header
The entered command does not exist, or the syntax is wrong.

Iso-Tech IPS 2303S Specifications

General

Brand	Iso-Tech
Model	IPS 2303S
Category	Power Supply
Language	English