Chapter 5 Switch Operations
This chapter describes how the Switch Operations View is used to manage MTAs,
Channels, Messages and Recipients.
5.1 Switch Operations Overview
The Switch Operations view displays information about Switches (MTAs) using an
Explorer Window.
The Switch Operations view connects to the Queue Manager of each configured Switch.
The connection parameters for each Switch need to be set up by an Administrator. These
parameters include a username (SASL ID) and password.These are set up by the M-Switch
Administrator.
The Switch Operations view appears as follows providing a Explorer Window which
shows the different Switch instances whose connections have been configured. Each Switch
actually represents the Queue Manager for that Switch. Beneath each Switch/Queue Manager
are the configured Channels for that Switch. Beneath a Channel there may either be queued
Messages when the Channel processes messages within the MTA or Peer MTAs which
represent external destinations to which Messages will be transferred by the Channel.
Under each Message are the recipients for that Message which will be processed for the
parent Peer MTA.
Figure 5.1. Simple Switch Operations View
Once you have connected to a Switch, you will be able to see the different messaging
entities, as in the above diagram: Figure 5.1, “Simple Switch Operations View”.
• the configured channels,
• messages queued on those channels,
Switch Operations
9M-Switch Operator's Guide
To Next Page
Loading...
General