Chapter 11 Vetting View
The Vetting View allows Operators to check that selected messages are suitable for queueing
and sending and then manually release them for processing.
Authorization Rules can be used to select messages to be "held" on arrival (submission or
transfer-in) at a Message Switch. Messages which are "held" remain queued on their first
scheduled channel until they are either manually released (via a SOM protocol operation)
using the Vetting View or reach their expiry time, when they will be non-delivered.
Message holding allows messages to be inspected and cleared (or manually non-delivered)
by an operator. Use of Authorization Rules to select those messages which will be held
allows holding to be restricted to a subset of messages, e.g. those routed to external MTAs.
Authorization Rules are described in the M-Switch Administrator's Guide
The Vetting View is very like the standard Switch Operations view, except that it only
displays messages which are in the "held" state. Within the View, these messages can be
selected and their content inspected. The messages can either be released for normal
processing or non-delivered, using the toolbar buttons provided.
Vetting View
48M-Switch Operator's Guide