8 STORAGE
8.1 HOW TO DISASSEMBLE AND STORE THE PRODUCT
To disassemble and store the product:
1. Remove the mic pole
Ⓘ and the nut for securing the mic pole Ⓗ
2. Remove the stand and place the ISOVOX 2 on the oor.
3. Unzip all sides and remove all parts.
4. Place the parts in the original packaging.
NOTICE!
Place the hard parts in a separate
bag, or the original bag that it was delivered in.
5. Store the product.
NOTICE!
The storage conditions shall not exceed:
• Storage temperature range: 0ºC to +50ºC
• Relative humidity: max 50% at +50ºC
9 DISPOSAL
9.1 HOW TO RECYCLE PARTS
To recycle the ISOVOX 2:
1. Go to your local recycling station.
• Dispose of all absorption material in the plastic recycling bin.
• Dispose of the base plate in the wood bin.
• Dispose of metal in the hardware bin.
NOTICE!
If unsure, ask the local recycling
station employee.
• For disposal of the LED light, see Disposal of electronic equipment.
• For disposal of the batteries, see Disposal of batteries.
• For disposal of the packaging, see Disposal of packaging.
To Next Page