EasyManuals Logo

Ispring CRO1000 User Manual

Ispring CRO1000
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Page
7
www.123filter.com | (678) 261-7611 | support@123filter.com
Product Features
1). Scope and Intended Use
This system is designed for use with municipal water in residential and light commercial applications.
2). Water Treatment Process
Municipal Tap Water PP Sediment Filter Carbon Block Filter Carbon Block Filter Reverse
Osmosis Membrane Pure Water
Specifications
Model No.
CRO1000
Inlet Water Pressure Range*
80 -130 psi
Optimal Inlet Water Pressure
100 psi
Inlet Water Temperature
41–100°F
Maximum Pure Water Flow**
Up to 1000 GPD 0.7GPM
*Booster pump recommended if inlet water pressure is less than 80 psi for optimal performance.
** Tested with water of 150ppm TDS, at 100 Psi and 73°F. The actual flow rate differs based on specific conditions.
Filter Changing Schedule***
Filter
PP Sediment Filter
CTO Filter
RO Membrane
***Actual filter life may vary based on specific water conditions.
3). Product Dimensions
Figure 4. Overall Dimensions (measurements are in mm)

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ispring CRO1000 and is the answer not in the manual?

Ispring CRO1000 Specifications

General IconGeneral
BrandIspring
ModelCRO1000
CategoryWater Filtration Systems
LanguageEnglish

Related product manuals