D. Reconnect the water supply.
E. Rinse the system by running water for at least 30 minutes after installing a new filter(s).
F. Reset the filter status. Please refer to the "Filter Service Life Reset" section for
instructions.
4) Display and Operating Area/Indicators
A. ''Working'' Light:
The blue light will remain on when the system is running and filtered water is being dispensed.
The light will remain off when the system stops dispensing water.
B. ''Filter Service Life'' Light:
Service Life Stage
Remaining Life
(Days)
Remaining
Capacity
(net water/liter)
Indicator Color Buzzer
Normal
＞15 ＞150
Blue None
Warning 0 - 15 0 - 150 Purple Sounds twice
Alarming 0 0 Red
Sounds when
water is flowing
The filter life indicators are controlled by a timer and flow monitor. Change the filter when the
light runs red. To reset the indicator after filter replacement, see the "Filter Serve Life Reset"
section.
C. ''Power'' Light
This light remains activated when the system is powered on.
www.123filter.com | (678) 261-7611 | support@123filter.com Page 13
To Next Page
Loading...
Need help?
General
