Product Features
1) Product Scope
• For residential use ONLY.
• Applicable water quality: municipal.
2) Specifications
3) Water Treatment Process
Municipal tap water → Composite filter → Reverse osmosis filter → Purified water
4) Filtration Performance
1
st
Composite
Filter
Removes unpleasant chlorine, taste, odor, cloudiness, and coloring.
Removes dirt, sand, silt, rust, and scale particles and absorbs
THMs and pesticides.
2
nd
Osmosis
Removes lead (removes up to 98% of lead), chlorine, fluoride,
arsenic, hormones, asbestos, calcium, sodium, and more using a
0.0001 (one ten-thousandth) micron membrane.
5) Filter Service Life Table
Recommended Replacement Cycle
Note: The actual water flow rate will vary depending on several factors such as water quality,
high TDS (500 ppm+), low temperatures (below 55°F), and low pressure (below 25 psi). These
will limit the performance of the system and reduce filter life.
Flow Rate of Purified Water
Power Specifications
www.123filter.com | (678) 261-7611 | support@123filter.com Page 5
To Next Page
Loading...
Need help?
General
