Ispring UVF11A Installation And Maintenance Manual

- 7 -
Please cut the tubing in an appropriate length to avoid kinking. Please make sure the tubing is fully inserted into
the quick-fitting connection about one half-inch deep in order to be sealed by the O-ring at the bottom.
8) Connect the UV transformer to an electrical outlet.
9) Turn on water supply and faucet. Observe the system for any leaks and check if water flow activates the UV light.
--------------------------------------End of installation of Model UVF11A/UVF11B/UVF11B-E---------------------------------------------

Ispring UVF11A Specifications

General

Brand	Ispring
Model	UVF11A
Category	Water Dispenser
Language	English