ENGINE MECHANICAL (C22NE, 22LE, 20LE) 6A-31
Installation
Camshaft pulley-counterhold at hex head of camshaft,
camshaft housing cover.
Toothed belt-see operation “Toothed Belt, Replace”.
Note operating erection of toothed belt.
Tighten (Torque)
Camshaft pulley to cammshaft-45 N⋅m (3.7 kgf⋅m)
Tighten (Torque)
Camshaft housing cover to cover to housing-8 N⋅m (0.8 kgf⋅m)
To Next Page
