6A-42 ENGINE MECHANICAL (C22NE, 22LE, 20LE)
Removal
6. Remove the camshaft housing cover and camshaft pulley
by counter-holding at the hex head of camshaft.
Removal
7. Remove the fastening bolts from camshaft housing.
Removal
8. Remove the exhaust pipe from exhaust manifold.
9. Loosen the cylinder head bolts spirally from the outside
inwards (first 1/4, then 1/2 revolution).
Removal
1. Remove the camshaft housing from cylinder head.
2. Remove the cam followers, thrust pieces and hydraulic
valve lifters.
Note the allocation.
3. Remove the cylinder head.
Clean
Sealing surfaces, bores and threads of cylinder head bolts.
Inspection
Check cylinder head and cylinder block for plane Surfface-see
operations “Cylinder Head. Check for Plane Surface” and
“Cylinder Block, Check for Plane Surface.”
To Next Page
