ENGINE ASSEMBLY ( 3 )
15. Glow Plug and Glow Plug Connector
1) Tighten the glow plugs to the specified torque.
Glow Plug Torque kgf·m(lb.ft/N·m)
2.0 – 2.5 (14.4 – 18.1/19.6 – 24.5)
2) Install the glow plug connectors.
16. Injection Nozzle Holder
1) Install the injection nozzle gasket 1 and the O-
ring 2 to the injection nozzle holder 3 .
2) Install the nozzle holder 3 together with the
nozzle holder bracket 4 to the cylinder head.
3) Tighten the holder nuts with washer 5 to the
specified torque.
Injection Nozzle Holder Nut Torque kgf·m(lb.ft/N·m)
3.2 – 4.4 (23.1 – 31.8 –/31.4 – 43.2)
To Next Page
Loading...
