Isuzu D-Max Installation Manual

bumper, and using torque wrench
unscrew 2 nuts, as shown.
* Set aside for re-use later.
8. Remove 4 plugs in the lower part of
to the center.
9. Carefully dismantle the bumper.
sensors.
Pull the bumper edge by unlatching the
latches, moving from the bumper edge
Disconnect fog lights and parking
10. Dismantle plastic liners, disconnect
plugs (6 pc.), as shown.
* Set aside for re-use later.
www.rival4x4.com
Date: 30.05.2019
Installation manual 2L.9101.1
< Page 6 of 16 >
Инструкция по установке
INSTALLATION PROCEDURE

Isuzu D-Max Specifications

General

Brand	Isuzu
Model	D-Max
Category	Automobile
Language	English