Isuzu D-Max Installation Manual

* Set aside for re-use later.
Remove front bream.
11. Unscrew fitting bolts of the front
beam to the chassis, as shown.
12. Unscrew 2 bolts of the bunoer
brackets, on the left and right side of the
vehicle, as shown.
* Set aside for re-use later.
13. 11. Place bushings (pos. 7,8) into
the chassis, on the left and right side of
the vehicle, as shown.
www.rival4x4.com
Date: 30.05.2019
Installation manual 2L.9101.1
< Page 7 of 16 >
Инструкция по установке
INSTALLATION PROCEDURE

Isuzu D-Max Specifications

General

Brand	Isuzu
Model	D-Max
Category	Automobile
Language	English