3. FEATURES
Heavy-duty public address power amplifiers deliver clean audio power from 350 to 650 watts RMS with less
than 0.5% distortion. Rugged and overbuilt to provide years of reliable service they are equipped with
torroridal transformers, extensive heat-sinking, forced fan cooling and protective circuits against short-circuit,
clipping and over-temperature.
2. GENERAL DESCRIPTION
1. Rated outputs from 350W to 500W and 650W.
2. 100V/70V lconstant voltage outputs and 4~16 ohms constant resistance outputs.
3. Commercial-grade torroidal transformers produce high performance audio on a wide range of
frequencies with minimal noise and high fidelity, even at high volume.
4. Intelligent limiter can reduce excess signal.
5. Reliable protection against overload, short circuit, and power fluctuation for optimum reliability.
6. Heat sinks and fan protect against overheating, protecting the amplifiers working life.
7. Rubber feet and rack mount ears-may be placed on tables or installed in rack mount cabinets.
5
To Next Page
Loading...
Need help?
General
