Inspection and Installation
• YES: indicates reset the LAN setting.
View LAN Interface Information
The operation steps to view the LAN interface information are as follows.
1. Press the composite keys [Shift] + [DC](System) to enter into the system
menu interface.
2. Rotate the knob to select I/O Config and press [Enter] key to confirm.
3. Rotate the knob to select LAN and press [Enter] key to confirm.
4. Rotate the knob to select I/O Advance Config and press [Enter] to enter
the LAN advanced setting interface.
5. Rotate the knob to select LAN Info and press [Enter] to view the LAN inter-
face information.
6. Rotate the knob to view the LAN interface information. Refer to 1.7 System
Menu at a Glance for more information.
7. After setting, press [Esc] to exit.
Enable LAN services
The configurable services include: mDNS, Ping, Http, Telnet, VXI-11 and Raw
Socket. When using the LAN interface, these services are enabled by default
and can be used directly. If you need to turn it off or on again, please refer to the
following steps:
1. Press the composite keys [Shift] + [DC](System) to enter into the system
menu interface.
2. Rotate the knob to select I/O Config and press [Enter] key to confirm.
3. Rotate the knob to select LAN and press [Enter] key to confirm.
4. Rotate the knob to select I/O Advance Config and press [Enter] to enter
the LAN advanced setting interface.
5. Rotate the knob to select Server and press [Enter] key to enable or disable
the LAN service.
6. Rotate the knob to select the service you want to enable and press[Enter]
key to confirm.
7. Rotate the knob to switch On and Off options. After selecting On or Off,
press [Enter] key to confirm.
• On: indicates enable the service.
• Off: indicates disable the service.
8. When enabling the Raw Socket service, the user needs to set the corre-
sponding Port.
9. After setting, press [Esc] to exit.
Copyright © Itech Electronic Co., Ltd.
35
To Next Page
Loading...
Need help?
General
