Need help?Do you have a question about the ITech IT6015C-80-450 and is the answer not in the manual?
General| Model | IT6015C-80-450 |
|---|---|
| Category | Power Supply |
| Output Voltage | 0-80 V |
| Output Current | 0-450 A |
| Output Power | 15 kW |
| Cooling | Forced air cooling |
| Storage Temperature | -20°C to 70°C |
| Input Voltage | 380VAC ±10%, 3 phase |
| Efficiency | > 90% |
| Protections | OVP, OCP, OTP |
| Operating Temperature | 0°C to 40°C |
| Relative Humidity | 0-80% RH |
Explains hazard symbols (CAUTION, WARNING) and safety precautions for instrument operation.
Guides through unpacking, verifying shipment, and installing the instrument, including power connection.
Explains how to connect the instrument to the device under test using local or remote sensing methods.
Covers setup for USB, LAN, CAN, GPIB, and RS-232 interfaces for remote instrument control.
Details setting output voltage, current, power, and configuring CC/CV priority modes.
Explains how to configure overvoltage, overcurrent, overpower, and other protection settings.
Covers LIST, ARB, Battery Test, Waveform Simulation, SAS, and Battery Simulation functions.
Covers mode switching, key lock, save/recall, data logging, communication settings, and parallel operation.
Details digital I/O ports for logic control and the optional analogue function for external control.
To Next Page