Need help?Do you have a question about the ITech IT6012C-800-50 and is the answer not in the manual?
General| Model | IT6012C-800-50 |
|---|---|
| Category | Power Supply |
| Output Power | 12 kW |
| Weight | 35 kg |
| Output Voltage | 0 ~ 800V |
| Output Current | 0 ~ 50A |
| Input Voltage | 380 V AC |
| Frequency | 50/60 Hz |
| Operating Temperature | 0 ~ 50°C |
| Storage Temperature | -20°C to +70°C |
| Current Resolution | 0.01 A |
| Efficiency | 90% |
Defines CAUTION, WARNING, and NOTE signs used in the manual.
Lists essential safety precautions to observe during instrument operation.
Details precautions and steps for safely connecting the instrument's power cord.
Describes how to connect test cables between the instrument and the device under test.
Explains how to connect the instrument to a computer for remote control.
Guides on setting the output voltage value using the front panel controls.
Details how to set the output current value via the front panel.
Explains how to set the output power value for the instrument.
Describes the instrument's protection functions like OVP, OCP, OPP, UCP, UVP, OTP.
Lists available functions like LIST, BATTERY, Waveform, SAS, Battery Emulator.
Guides on configuring and starting data recording of voltage and current.
Details how to configure communication interfaces like USB, LAN, CAN, GPIB, RS-232.
Explains how to set up instruments for parallel operation to increase power output.
Describes the digital I/O function for logic control and external signal interaction.
Details methods for upgrading the instrument's system version via USB or Web.
Lists the primary technical specifications including voltage, current, and power ratings.
Provides a list of common fault information and their troubleshooting steps.
To Next Page