ITech IT6015C-80-450S

Bi-directional Programmable
DC Power Supply
IT6000C Series User Manual
Model: IT6000C Series
Version: V1.4/08,2020

ITech IT6015C-80-450S Specifications

General

Brand	ITech
Model	IT6015C-80-450S
Category	Power Supply
Language	English

Summary

Notices

Safety Notices

Guidelines and symbols for safe operation.

Safety Symbols

Safety Precautions

Essential safety measures to be observed during operation.

Environmental Conditions

Quick Reference

Inspection and Installation

Connecting the Power Cord

Procedures and precautions for connecting AC power.

Connecting the Device Under Test (DUT)

Instructions for connecting the instrument to the load.

Remote Interface Connection

Setup for communicating with the instrument via PC.

Getting Started

Set Output Value

How to set voltage, current, and power output values.

OnOff Control

Turning the instrument's output on and off.

Power Supply Function

Set the Output Voltage

Procedure for setting the output voltage level.

Set the Output Current

Procedure for setting the output current level.

Set the Output Power

Procedure for setting the output power level.

Config Menu for Power Supply

Description of configuration menu settings for power supply.

Protection Function for Power Supply

Configuration of overvoltage, overcurrent, and other protections.

Function Menu for Power Supply

Overview of advanced functions like LIST and BATTERY.

Basic Operation

Set the Communication Information (IO Con)

Configuring communication interfaces (USB, LAN, etc.).

Set Parallel Operation Mode (Parallel)

Digital IO Function (Digital Port)

Technical Specification

Main Specification

General technical specifications of the instrument.

80 V

300 V

500 V

800 V

1500 V

2250 V

Routine Maintenance