Getting Started
3 Getting Started
♦ Power-on Self-Test
♦ Set Output Value
♦ Use the Front Panel Menu.
♦ On/Off Control
3.1 Power-on Self-Test
Before operation, please confirm that you have fully understood the safety
instructions.
When you turn the POWER switch on for the first time after purchase, the instru-
ment starts with its factory default settings. Each time thereafter, the instrument
starts according to the setting that you selected as outlined in 5.6 Set the
Power-on State (PowerOn).
Copyright © Itech Electronic Co., Ltd.
39
To Next Page
Loading...
