ITech IT6018C-1500-30 - User Manual

Bi-directional Programmable
DC Power Supply
IT6000C Series User Manual
Model: IT6000C Series
Version: V1.1/04,2019
Via Acquanera, 29 22100 Como
tel. 031.526.566 (r.a.) fax 031.507.984
info@calpower.it www.calpower.it

ITech IT6018C-1500-30 Specifications

General

Model	IT6018C-1500-30
Category	Power Supply
Output Voltage	0-1500V
Output Current	0-30A
Voltage Resolution	10mV
Current Resolution	1mA
Input Frequency	47-63Hz
Cooling Method	Forced air cooling
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Communication Interface	USB, LAN, RS232
Relative Humidity	≤80% RH (non-condensing)

Summary

1 Quick Reference

1.2 Front-Panel Overview

Details the layout and components of the instrument's front panel.

1.3 Keyboard Introduction

Explains the function of each key on the instrument's front panel.

1.5 Rear Panel Introduction

Illustrates and describes the connectors and ports on the instrument's rear panel.

2 Inspection and Installation

2.1 Verifying the Shipment

Guides users on checking package contents and identifying any missing or damaged items.

2.3 Connecting the Power Cord

Details precautions and procedures for safely connecting the power cord.

2.4 Connecting the Device Under Test (DUT)

Explains how to connect test cables between the instrument and the device under test.

2.5 Remote Interface Connection

Describes standard and optional interfaces for remote communication with the instrument.

2.5.1 USB Interface

2.5.2 LAN Interface

3 Getting Started

3.1 Power-on Self-Test

Guides users through the initial power-on self-test procedure for the instrument.

3.2 Set Output Value

Explains how to program voltage, current, and power output values.

3.3 Use the Front Panel Menu

Details how to navigate and use the instrument's front panel menu system.

3.4 On;Off Control

Describes how to control the instrument's output power using the On/Off key.

4 Power Supply Function

4.1 Set the Output Voltage

How to set the output voltage value and its range.

4.2 Set the Output Current

How to set the output current value and its range.

4.3 Set the Output Power

4.4 Config Menu for Power Supply

4.5 Protection Function for Power Supply

Explains various protection functions like OVP, OCP, OPP, UCP, UVP.

4.6 Function Menu for Power Supply

4.6.1 LIST Function

4.6.2 Battery Charging;Discharging Test Function

4.6.3 Built-in Waveform Function

4.6.4 Solar Photovoltaic Curve Simulation Function (SAS)

4.6.5 Battery Simulation Function

5 Basic Operation

5.1 Local;Remote Mode Switch

5.3 Save and Recall Operations

5.4 Data Logging Function

5.7 Sense Function (Sense)

5.8 Select Trigger Source (Trig Source)

5.9 Set the Communication Information (I;O Con)

5.10 Set Parallel Operation Mode (Parallel)

5.11 Digital I;O Function (Digital Port)

5.13 Restored to Factory Setting (System Reset)

5.15 System Upgrade

6 Technical Specification

6.1 Main Specification

Provides detailed technical specifications for various IT6000C models.