ITech IT6018C-1500-30 User Manual

Inspection and Installation
5. Mount the protective cover back to its original position.
6. Connect the other end of the power cable to the required AC distribution
box.
The schematic is shown below.
2.4 Connecting the Device Under Test (DUT)
This section describes how to connect the test cables between the instrument
and DUT.
Precautions
To prevent electric shock and damage to the instrument, observe the following
precautions.
Copyright © Itech Electronic Co., Ltd.
23

ITech IT6018C-1500-30 Specifications

General

Brand	ITech
Model	IT6018C-1500-30
Category	Power Supply
Language	English