Need help?Do you have a question about the ITech IT6000D Series and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Cooling Method | Forced air cooling |
| Category | Power Supply |
| Voltage Resolution | 1 mV |
| Interface | Front panel, remote control |
| Communication Interface | LAN, USB, RS232 |
| Protection | OVP, OCP, OPP, OTP |
| Protection Features | Over Voltage, Over Current, Over Power, Over Temperature |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20 to 70°C |
| Relative Humidity | 10 to 90% RH (non-condensing) |
Explains CAUTION, WARNING, and NOTE symbols for hazard and important information.
Provides instructions for unpacking and safely transporting the instrument.
Details the procedures and precautions for connecting the instrument to a power source.
Explains how to connect the instrument to the device being tested.
Explains the instrument's self-test procedure upon power-on for proper functionality check.
Guides on how to program voltage, current, and power parameters for the instrument.
Details how to set the desired output voltage for the power supply.
Explains how to set the desired output current for the power supply.
Covers various protection functions like OVP, OCP, OPP, UCP, UVP, OTP, and Sense reverse protection.
Details the LIST function for program editing, import/export, and running sequences.
Explains how to perform instrument self-tests for checking system functionality.
Provides information on common faults and their solutions for the instrument series.
To Next Page