Need help?Do you have a question about the ITech IT6000C Series and is the answer not in the manual?
General| Brand | ITech |
|---|---|
| Model | IT6000C Series |
| Category | Power Supply |
| Language | English |
Provides warranty terms and conditions for the product.
Details safety warnings and precautions to prevent hazards.
Outlines ITECH's warranty for product defects in material and workmanship.
Specifies conditions under which the warranty becomes invalid.
Lists essential safety measures to be observed during instrument operation.
Explains regulatory compliance tags such as CE and WEEE.
Lists electromagnetic compatibility standards the product conforms to.
Lists safety standards the product conforms to.
Introduces the IT6000C series power supply capabilities and features.
Provides a schematic and description of the instrument's front panel components.
Details the functions of each key on the instrument's front panel.
Describes the interfaces and terminals located on the rear panel of the instrument.
Explains the meaning of various indicator lamps on the VFD display.
Outlines how to operate and configure the instrument's settings.
Provides an overview of system menus for understanding instrument functions.
Details optional accessories and interface cards available for the instrument.
Instructions for safely unpacking and transporting the instrument.
Procedures for checking package contents and reporting discrepancies.
Guides on how to safely connect the instrument to AC power.
Describes how to connect the instrument to the device being tested.
Explains how to connect the instrument to a computer for remote control.
Explains the initial self-test procedure performed upon powering on the instrument.
Explains how to set voltage, current, and power output values.
Details how to navigate and use the instrument's front panel menu system.
Explains how to control the instrument's output on and off states.
Guides on setting the output voltage for the power supply.
Guides on setting the output current for the power supply.
Details the configuration settings available for the power supply.
Explains the various protection functions like OVP, OCP, and their settings.
Describes the additional functions available such as LIST and ARB.
Explains how to switch between local and remote control modes.
Describes how to lock the front panel keys to prevent misoperation.
Details how to save and recall instrument settings for convenience.
Explains how to record and save test data from the instrument.
Describes the digital input/output functionality for control and monitoring.
Provides the primary technical parameters of the power supply.
Lists detailed specifications for the 80V series models.
Lists detailed specifications for the 300V series models.
Lists detailed specifications for the 500V series models.
Lists detailed specifications for the 800V series models.
Lists detailed specifications for the 1500V series models.
Lists detailed specifications for the 2250V series models.
Provides additional information on storage capacity and calibration.
Explains how to perform and interpret the instrument's self-test.
Provides guidelines for cleaning and maintaining the instrument.
Information on how to contact ITECH for support or repair.
Details the process for returning the instrument for repair services.
Lists specifications for optional test cables.
Provides information on common faults and their solutions.
Describes the procedure for replacing fuses in the instrument.
To Next Page