ITech IT6502D Programming Guide

This command is used to savae the calibration parameters in a nonvolatile memory.
Command syntax：CALibration:SAVe
parameter：None
CALibration:STRing
This is used to set the calibration information
Command syntax：CALibration:STRing <parameter>
Parameter： The max length is a chart with 20 letters,i.e the relative information during the
calibration process,such as calibration date.
example：CAL DATE: 2011/01/01
CALibration:STRing?
This is used to view the information of the time.
Inquiry syntax：CALibration:STRing?
Return parameter：calibration information saved in the power supply
CALibration: INITialize
This command is used to initialize the calibration parameters.
Command syntax：CALibration: INITialize
parameter：None

ITech IT6502D Specifications

General

Brand	ITech
Model	IT6502D
Category	Power Supply
Language	English