ITech IT6502D Programming Guide

Command syntax：*SAV<NRf>〉
Parameter: 0~9
*RCL
This command can recall the setups you saved before from the specified memory.
Command syntax：*RCL<NRf>
Parameter: 0~9
4.2 SCPI essential commands
STATus:QUEStionable[:EVENt]?
This command can be used to read the value in query event register. After executing this
command, the query event register will be cleared.
Query syntax：STATus:QUEStionable[:EVENt]?
Parameter: None
Returned parameter：<NR2>
Relative command： STATus:QUEStionable:ENABle
The bit definition of query event enable register：
Bit position 15 14 13 12 11 10 9 8
Bit name no use no use no use no use no use no use no use no use
Bit weight
Bit position 7 6 5 4 3 2 1 0
Bit name no use no use no use OT OP no use OC OV
Bit weight 16 8 2 1
STATus:QUEStionable:CONDition?
This command is used to read the value of query condition register. When a bit of quest
condition changes, the bit value corresponding in quest event register is 1.
Query syntax：STATus:QUEStionable: CONDition?
Parameter:None
Returned parameter：<NR2>
STATus:QUEStionable:ENABle
This command can set the parameter of quest event enable register. Setting parameter can
determine which bit value of quest event register is 1 and the bit will enable QUES

ITech IT6502D Specifications

General

Brand	ITech
Model	IT6502D
Category	Power Supply
Language	English