ITech IT6512 User Manual

Function and Features
Copyright ©ITECH Electronic Co., Ltd. 16
On
ISO16750-2
ISO16750-2 profile
simulate the waveform to verify the
anti-interference performance of the automotive
electronics’ products.
Short voltage drop
Short voltage
drop
This test simulates the effect
when a conventional fuse
element melts in another circuit
12V
Select 12V or 24V waveform
24V
Off
Enable or Disable the Short
voltage drop function.
On
Profile for the reset
test
Profile for the
reset test
This test verifies the reset
behaviour of the DUT at
different voltage drops. This test
is applicable to equipment
with reset function
Usmin…
The minmum supply voltage
Usmin
Off
Enable/Disable this function
On
Starting profile
This test verifies the behaviour of a DUT during
and after cranking.
12V
Select 12V or 24V test system
24V
1
Set the
levels/voltages/duration of
starting profile
Repeat
Set the cycle times(1-100)
Delay
Set the delay time
(0.01s-100.00s)
Off
Enable/Disable this function
On
INFO
Power Info…
Product information
Model:IT65XX
Ver:1.00-1.00
SN:0123456789AF
model, software version, SN
No Information
Reserved for calibration information
Exit Menu
Quit menu operation
IT6512A/IT6513A/IT6502D
DEVICE
MENU
SYSTEM
System menu
Initialize
Initialize the system
Power On
Set power on parameters
Rst(Def)
Restore to factory defaults
Sav0
Remian last shutdown parameters
Trigger
Manual(Def)
Manual trigger
Bus
Bus trigger
Memory
Memory
Work with recall button to recall 100sets
saved parameters

ITech IT6512 Specifications

General

Brand	ITech
Model	IT6512
Category	Power Supply
Language	English