ITech IT6512 User Manual

Function and Features
Copyright ©ITECH Electronic Co., Ltd. 18
Ext-Ctrl mode and
related parameter
setting
10v-M
10V/5V monitoring mode options
10V/10K-P
10V/10K or 5V/5K setting mode selection
V-P
Voltage(resistance)setting mode selection
Off
Disable this function
Limit
Vmin= 1.000V
Minmum voltage setting
Vmax=
80.000V
Maximum voltage setting
Online
connection mode
Parallel
Parallel connection
Series
Series connection
Master
Act as a master
Slave
Act as a slave
Addr…
Address
Off
Disable this function
On
Enable this function
OCP
Off
Disable over current protection function
On
Enable over current protection function
INFO
informati
on about
this
machine
Model:IT6512
Ver:1.00-1.00
SN:0123456789AF
model,software version,SN
No Information
Reserved for calibration information
Exit Menu
Quit menu operation
Note
press + (Menu) to view the menu items,press to quit menu
operation.Besides,press button can enable you quit the function operation state.
Output voltage set (>Vmax,Vmin)
The voltage can be set between 0A and rated voltage.Pressing + (Menu) to
entry into Config item,and then using knob or direction keys to select Vmin option under
Limit item.Press button,then set the minmum voltage.After pressing
button,you could set the maximum voltage.After the setting operation,the voltage can only
be adjusted within the limitation of Vmin and Vmax.
Default Vmax value is the rated voltage,and Vmin is 0V.
Communication Set(>Communication )
Under this item,you can set the concrete communication mode.This unit has provided
multiple communication interfaces:RS232/USB/GPIB/RS485.Of which,the GPIB are
addressable from 0-31.The baudrate options of RS232 are
4800,9600,19200,38400,57600,11.52K.Data bit is 8bits.Parity bit has three
options:NONE,ODD,EVEN.Please ensure the configuration consistency between our
instrunment and PC,so that you could have a successful communication.
Key Sound Set(>Buzzer)
This item can set the buzzer state.On option indicates that when you push buttons,the
buzzer will sound.OFF option indicates that the buzzer function is disabled.Factory
Enter
Enter

ITech IT6512 Specifications

General

Brand	ITech
Model	IT6512
Category	Power Supply
Language	English