ITech IT6512A Programming Guide

Return parameter：0-15
4.8 List Operation Commands(Specialized function for model
IT6512/6513/IT6532A/IT6533A/IT6523D)
LIST:STATe
This command is used to set the state of list mode.
Command syntax：LIST:STATe<0|1|ON|OFF>
Inquiry syntax：LIST:STATe?
Return parameter：0|1
LIST:RECall
This command is used to recall a list file.
Command syntax：LIST:RECall<NR1>
parameter：1~10
inquiry syntax：LIST:RECall?
Return parameter：1~10
LIST:EDIT
This command is used to select list file which has been edited.
Command syntax：LIST:EDIT<NR1>
parameter：1~10
inquiry syntax：LIST:EDIT?
Return parameter：1~10
LIST:POWer
This command is used to edit the power of list file.
Comman syntax：LIST:POWer<NRf>
parameter：MIN~MAX
inquiry syntax：LIST:POWer?

ITech IT6512A Specifications

General

Brand	ITech
Model	IT6512A
Category	Power Supply
Language	English