ITech IT6522D

Output Commands
Copyright© Itech Electronics Co., Ltd. 38
Command syntax
[SOURce:]POWer:MINimum[:LEVel]
Arguments
MINimum|MAXimum|NRf
Unit
W
Reset Value
0.0
Example
POW:MIN 2.0
Query syntax
[SOURce:]POWer:MINimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf
[SOURce:]POWer:MAXimum[:LEVel]
This command is used to set maximum value of power.
Command syntax
[SOURce:]POWer:MAXimum[:LEVel] <MINimum|MAXimum|NRf>
Arguments
MINimum|MAXimum|NRf
Unit
W
Reset Value
MAXimum
Example
POW:MAX min
Query syntax
[SOURce:]POWer:MAXimum[:LEVel]? [MINimum|MAXimum]
Returns
NRf