ITech IT6522D

Output Commands
Copyright© Itech Electronics Co., Ltd. 45
Reset Value
0
Example
OUTP 1
Query syntax
[SOURce:]OUTPut[:STATe]?
Returns
0|1
[SOURce:]CV:PRIority
This command is used to set the CV priority.
Command syntax
[SOURce:]CV:PRIority <HIGH|LOW>
Arguments
HIGH|LOW
Reset Value
HIGH
Example
CV:PRI HIGH
Query syntax
[SOURce:]CV:PRIority?
Returns
<CRD>
[SOURce:]CC:PRIority
This command is used to the CC priority.
Command syntax
[SOURce:]CC:PRIority <HIGH|LOW>
Arguments
HIGH|LOW
Reset
HIGH