Need help?Do you have a question about the ITech IT7915-350-90 and is the answer not in the manual?
General| Model | IT7915-350-90 |
|---|---|
| Voltage Resolution | 1mV |
| Current Resolution | 1mA |
| Category | DC Power Supply |
| Programming Interface | RS232/RS485/CAN/LAN/GPIB/USB |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
Identifies and describes the components of the IT7900's front panel.
Explains the function of each key on the IT7900's keyboard for operation.
Provides safety precautions and steps for connecting the power cord correctly.
Details wiring diagrams for connecting the Device Under Test locally.
Explains wiring for remote sensing for accurate voltage measurements.
Guides on safely powering on the instrument and initial checks.
Describes the IT7900's touch screen interface and display elements.
Details how to program voltage and frequency values for output.
Explains how to control the instrument's output status using the On/Off key.
Explains how to select single-phase, three-phase, or multi-channel modes.
Details the four output modes: AC, DC, AC+DC, and DC+AC for various applications.
Describes how to switch between local and remote control modes.
Explains overcurrent, voltage limit, and over-temperature protection settings.
Explains how to connect multiple units in parallel for increased power.
Details how to enable remote sensing for accurate voltage measurements.
Lists detailed technical specifications for the IT7900 series.
To Next Page
