Need help?Do you have a question about the ITech IT7324 and is the answer not in the manual?
General| Output Voltage | 0-32V |
|---|---|
| Voltage Resolution | 1mV |
| Current Resolution | 1mA |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Relative Humidity | < 80% |
| Current Accuracy | ±0.1% + 10mA |
| Ripple and Noise (CC) | < 3mArms |
| Line Regulation (CV) | < 0.01% + 3mV |
Explains safety indicators like CAUTION, WARNING, and NOTE for safe operation and potential hazards.
Details the one-year warranty service policy, including procedures for repair and shipping.
Explains various safety symbols used in the manual and their corresponding meanings.
Provides critical safety warnings regarding instrument damage, hazardous environments, and proper grounding.
Highlights cautions to prevent voiding protective features, ensure proper cleaning, and avoid unauthorized modifications.
Details how to connect the power cord, AC input levels, and select appropriate cord types.
Identifies and describes components on the front panel for various IT7300 models.
Explains the function of each key on the front panel and provides a key description table.
Identifies components and connectors on the rear panel of the unit.
Details the procedure for performing a power-on self-test to ensure proper operation.
Provides steps for troubleshooting if the power supply does not start correctly.
Verifies basic voltage functions and output response without load.
Describes methods for setting the output voltage from the front panel using keys or knob.
Details how to set the output frequency within a specified range using front panel controls.
Explains how to set starting and stopping phase angles for AC output within 0-360 degrees.
To Next Page
