ITech IT7324 User Manual

Acceptance and Installation
Copyright © Itech Electronics Co., Ltd. 7
1.3 Installation of power cord
Connect power cord of standard accessories and ensure that the power supply
is under normal power supply.
AC power input level
Working voltage for IT7321/IT7322/IT7322H/IT7324/IT7324H is 110V and 220V，
Working voltage for IT7326/IT7326H is 220V.so please pay attention to the
working input voltage.
IT7321 model support 110V/220V AC input.The AC line switch is located at the
bottom of the unit. T7322/IT7322H/IT7324/IT7324H models support 110V/220V
AC input.The AC line switch is located at the rear of the unit.Please pay
attention to the AC level setup before provide AC power.
AC power input level:
 Option 01:220VAC ± 10%, 47 to 63 Hz
 Option 02: 110VAC ± 10%, 47 to 63 Hz
Categories of power cords
IT7321 provides the standard power cords as below.
Please select appropriate power cords appropriate to local voltage based
on the specifications of power cords below. If purchased model fails to
meet local voltage requirements, please contact distributor or factory for
change.
China
IT-E171
America,
Canada,Japan
IT-E172
Europe
IT-E173
Britain
IT-E174
 IT7322/IT7322H/IT7324/IT7324H/IT7326/IT7326H provides the standard
power cords as below.
The power cords supplied with this product is certified for safety. In case the
supplied lines assembly needs to be replaced, or an extension lines must be
added, be sure that it can meet the required power ratings of this product. Any
misuse voids the warranty of this product.
Connecting AC Input
 Connect standard power cord to the power supply input terminal.
E
N L
E
L N
E
N L
E
L N

ITech IT7324 Specifications

General

Brand	ITech
Model	IT7324
Category	Power Supply
Language	English