ITech IT8702 Programming Guide

STATus Subsystem
Copyright © Itech Electronic Co., Ltd. 41
Query Syntax
STATus:CSUMmary[:EVENt]?
Parameters
None
Examples
STAT:CSUM:EVEN?
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:CSUMmary:ENABle
This command sets or reads the value of the Channel Enable summary register.
This command is not channel specific, it applies to the entire mainframe.
Command Syntax
STATus:CSUMmary:ENABle <NR1>
Parameters
0 to 255
Examples
STAT:CSUM:ENAB 3
Returned Parameters
<NR1> (register value)
Related Commands
*CLS
STATus:OPERation?
This query returns the value of the Operation Event register. The Event register
is a read-only register that holds (latches) all events that are passed by the
Operation NTR and/or PTR filter. Reading the Operation Event register clears it.
This command is not channel specific, it applies to the entire mainframe.

ITech IT8702 Specifications

General

Brand	ITech
Model	IT8702
Category	Test Equipment
Language	English