ITech IT8702 Programming Guide

SCPI Measurement Command
Copyright © Itech Electronic Co., Ltd. 57
Command Syntax
MEASure:ALLPower?
Parameters
None
Examples
MEAS:ALLP?
Returned Parameters
<NRf>
Note: Fetch command and measure command both can be used to read
all kinds of paramaters. The difference is that fetch command is used to
read the last measured paramaters, but measure command initiates and
executes a new measurement, and returns the measured parameter.
Fetch command is faster in speed but measure command is more precise.

ITech IT8702 Specifications

General

Brand	ITech
Model	IT8702
Category	Test Equipment
Language	English