Ithaca 150 - Page 96

Control Codes PcOS Series 150 Programmer's Guide
Summary by Function
Page 86 Rev G 12/14/99
[ESC] U <n> 1BH,55H &%GU {n=1}
&%GB {n=0}
Select bidirectional/unidirectional
mode.
n=0 bidirectional
n=1 unidirectional
47
[ESC] # 0 1BH,23H,
30H
&%QT Set Normal Print Mode. (HSD is
normal.)
22
[ESC] E 1BH,45H &%MM Begin emphasized print
(half-speed).
37
[ESC] F 1BH,46H &%CM End emphasized print. 37
[ESC] G 1BH,47H &%ME Begin enhanced print (double pass). 37
[ESC] H 1BH,48H &%CE End enhanced print. 37
[ESC] I <n> 1BH,49H &%QT {n=0}
&%QU {n=1}
&%QS {n=2}
&%QL {n=3}
Select print mode.
n=0 High Speed Draft
n=1 Utility
n=2 NLQ Sans-Serif
n=3 NLQ Courier
22
[ESC] [ @ ... 1BH,5BH,
40H
Set print style. (See command
description.)
34
International Character Sets
[ESC] ! <n> 1BH,21H &%CS<n> Select International Character Set. 24
[ESC] [ T <n> 1BH,5BH,
54H
&%CP
<m
1
><m
2
><m
3
>
<m
4
>
Set character set by code page. 26
Custom characters
[ESC] $ 1BH,24H Copy ROM character set to RAM
character set.
28
[ESC] =<n>
1
<n>
2
<start
code>
<data>
1BH,3DH Download character font image. 28
[ESC] > <n> 1BH,3EH Set custom character.
n=0 OFF
n=1 ON
28
Character pitch
[DC2] 12H &%F3 Set 10 cpi. 31
[ESC] : 1BH,3AH &%F2 Set 12 cpi. 31
[SI] 0FH &%F1 Set 17 cpi. 31
[ESC] [SI] 1BH, 0FH &%F4 Set 24 cpi. 31
[ESC] [ P <n> 1BH,5BH,
50H
&%F1-7 Set character pitch. 32
Character attributes
[SO]4 0EH &%MW Set one-line double-wide mode. 33
[DC4] 14H &%MN Cancel one-line double-wide mode. 33
[ESC] > <n> 1BH,3EH Set custom character.
n=0 OFF
n=1 ON
28
[ESC] % G 1BH,25H,
47H
&%MI Begin italics. 38
[ESC] % H 1BH,25H,
48H
&%CI End italics. 38
[ESC] - <n> 1BH,2DH &%CU {n=0}
&%MU {n=1}
Set underline.
n=0 end
n=1 begin
36
[ESC] S <n> 1BH,53H &%SB {n=1}
&%SP {n=0}
Select superscript/subscript.
n=0 superscript
n=1 subscript
38
[ESC] T 1BH,54H &%SE End superscript/subscript. 38