Ithaca 150 - Page 97

Programmer's Guide PcOS Series 150 Control Codes
Summary by Function
12/14/99 Rev G Page 87
[ESC] W <n> 1BH,57H &%FS {n=0}
&%FD {n=1}
&%FH {n=3}
Set multiline double-wide double-
high sequence.
n=0 end all
n=1 double-wide
n=2 double-high
n=3 both
34
[ESC] _ <n> 1BH,5FH &%CO {n=0}
&%MO {n=1}
Set overscore.
n=0 end
n=1 begin
36
Rotated print
[ESC] P <n> 1BH,50H &%RF {n=1}
&%RI {n=2}
&%RN {n=0}
Rotate font.
n=0 normal
n=1 rotated 90°
n=2 rotated 270°
23
[ESC] r <n> 1BH,72H &%R0 {n=0}
&%R1 {n=1}
&%R2 {n=2}
&%R3 {n=3}
Rotate print.
n=0 end
n=1 rotate by 90°
n=2 rotate left 180°
n=3 rotate by 270°
41
[ESC] s <n> 1BH,73H &%RL
<m
1
><m
2
><m
3
>
Set rotated print line length.
n=1..128 (Default 80)
43
[ESC] u <n>
1
<m>
1
<n>
2
<m>
2
...
<n>
k
<0>
1BH,75H &%RS Set rotated print line spacing.
nk=0 End where n=line and
m=dots from last line.
Note: All lines not specified are set
to 1 dot.
44
Graphics
[ESC] * <m>
<n>
1
<n>
2
1BH,2AH Print Epson 9-pin graphics in mode
<m>.
46
[ESC] ?
<m><n>
1BH,3FH Reassign graphic mode. 46
[ESC] K <n>
1
<n>
2
1BH,4BH Set single-density graphics.
n
1
=0..255
n
2
=0..3
len=n1 +256*n2
45
[ESC] L <n>
1
<n>
2
1BH,4CH Set double-density half-speed
graphics.
n
1
=0..255
n
2
=0..3
len=n1 + 256*n2
45
[ESC] Y <n>
1
<n>
2
1BH,59H Set double-density full-speed
graphics.
n
1
=0..255
n
2
=0..3
len=n1 +256 * n2
45
[ESC] Z <n>
1
<n>
2
1BH,5AH Set quad-density full-speed
graphics.
n
1
=0..255
n
2
=0..3
len=n1 +256 * n2
45
[ESC] U <n> 1BH,55H &%GU {n=1}
&%GB {n=0}
Select bidirectional/unidirectional
mode.
n=0 bidirectional
n=1 unidirectional
47