Configuration ITherm™ POSjet™ BANKjet™ Programmer's Guide
Ethernet Adapter
Page 24 Rev C Apr-04
with the rest of the network. It must be unique and within the same subnet as the remainder of
the network.
When you are satisfied with the values entered, press the Apply button to save the values.
Printer Protocols Page
Figure 9 Printer Protocols
The Printer Protocol page enables or disables the protocols the Wired Ethernet Adapter will
accept. Three protocols are supported, Line Printer Protocol (LPR), Port 9100 (RAW) and
Telnet. In most cases, leaving all protocols enabled is best.
When you are satisfied with the values entered, press the Apply button to save the values.
To Next Page
Loading...
