Programmer’s Guide ITherm™ POSjet™ BANKjet™ General Information
Ethernet Adapter
Apr-04 Rev C Page 9
• Configuration Page
o IP Address / Subnet Mask
o Auto-IP, DHCP, Static IP…
o Printer Textual Name (User Defined)
o Printer Location String (User Defined)
o Protocols Enabled/Disabled, Port
o LPR, Port 9100, Telnet
• Adapter Firmware Update
Other
• Push Button for Initial IP Address reset and adapter reset.
• Self-Diagnostics
• Firmware Upgrade via TFTP and HTTP
Advanced Features
Host Name
The Host Name, provided on the Printer Identification Page, is provided to the DHCP server
when DHCP is enabled. With this a decent DHCP-server, that is connected with the Domain
Name Server (DNS), as can be configured in Linux, allows programs access it using the
device name for it's IP address.
Support Utilities
• Locator
• Windows COM Port Virtualization
System Requirements
Printing – Any operating system that supports printing via RAW, LPR or Telnet connections
over TCP/IP. This includes, but is not limited to, Windows®, DOS, Linux, Unix and MAC OS.
Virtual COM Port – Windows® 2000, Windows® XP
Locator – Windows® 2000, Windows® XP
Electromagnetic Compatibility Requirements
The Wired Ethernet adapter shall meet all compatibility requirements specified for the PJ1000,
PJ1500, BANKjet and the iTherm.
Environmental
The Wired Ethernet adapter will match the environmental specifications for the PJ1000, PJ1500
and the iTherm
To Next Page
Loading...
