17
Remarks for use in potentially explosive atmospheres (ATEX):
• If film of rust is possible (flying rust in the immediate product surroundings), all outer aluminium
parts have to be protected accordingly (e.g. by varnish).
• The product must be electrically connected to adequately earthed installation.
• For installation, removing or repair of the product on site, only tools allowed for the correspon-
ding explosion area can be used.
• The product shall not be exposed to: flames, ionised radiation and ultrasound.
• Ambient temp. conditions must be considered, including possible additional heating effects
due to other devices in immediate vicinity.
17
To Next Page
Loading...
